ash and lacy - expanded metal buyers guide

Ash & Lacy is part of Hill & Smith Holdings plc

Registered in England and Wales under company number 529602

Registered office:
Westhaven House
Arleston Way
Shirley
Solihull
West Midlands
B90 4LH

www.hsholdings.co.uk

Offering:
Building and construction products
Highway barrier systems
Galvanising services
Pressworking
Non ferrous metals

Illustration 1.

1250mm LW x 2500mm SW

Illustration 2.

2500mm LW x 1250mm SW

LW: Long way of mesh dimension
SW: Short way of mesh dimension

Illustration 3. Raised Mesh Dimensions

The Long Way of the mesh pitch and the Short Way of the mesh pitch are measured from knuckle to knuckle

Illustration 4. Flattened Mesh Dimensions

Long Way and Short Way measurements are aperture dimensions

Raised and Flattened Mesh

1.	Raised Mesh: strands are inclined from the plane of the sheet.

2.	Raised Mesh: strands are inclined from the plane of the sheet.

Open Area %

Normal: is viewed when the sheet is held at right angles to the line of vision.

Maximum: is viewed when the thickness of the strand is parallel to the line of vision. This dimension doesn't apply to flattened mesh.

Information Required

1.	Reference Number from brochure or website.

2.	Raw material specification

3.	Sheet size or coil width

4.	Flattened or raised mesh

5.	LW and SW dimensions (see illustration 1 & 2)

•	Stock range available off the shelf

•	Bespoke options made to customer's specification

•	All dimensions quoted are nominal Eurexpand tolerances apply.

•	Ash & Lacy Terms & Conditions apply

•	Ash & Lacy reserves the right to modify the stock range at any time